ADVANTAGES OF THE GRANULATORS AND SHREDDERS KOMPASS
Full protection at operation - Total stop before various accesses to the machine - Full automated control - Very strong frame - Strengthened design of the rotor and the cutting chamber - Easy change of the screen - Hydraulic unit suitable for the opening of the screen cradle: By this way the screen plate will be changed without the necessity to be move the Discharge system - Hydraulic unit for removing of the hopper - Preventive Clutch between the shaft and the pulley for the rubber belts from the motor drive - Coated with Zinc before the painting - Very low rate of the dust - Prolong term for a life of the knives before the changing for sharpening - Adjustable knives - A jig where the rotor knives can be pre-set outside of the machine so that you can change them quickly without adjusting them in the machine - Bearings from SKF-El. control from Telemecanique or "Square D" the US - El. motors from Italy - Rubber belts for the motor drive from Germany or CZ - knives steel 1.2357 = 50CrMoV13-1 = S7 - Steel from Germany.
The offered from us container tilters are suitable to cover your needs to handle metal scrap, bulk goods, grain … etc. in 20' and 40' sea containers.
The machine has uniquely patented features which allows a container to be taken from the lorry and tilted 90 degrees in about 6 minutes.
The heavy duty load cells are able to record the weight at any stage during filling. The hydraulic door pin and closing mechanisms enables the lorry to be loaded in approximately 20 minutes. The machine has been designed and built mainly to withstand the tough operating conditions of the recycling industry, but will comfortably adapt to other industry sectors.
When you order from us the tilter(s) we can sign a contract with you to buy your metal scrap HMS 1&2 80/20 or/and your baled PET bottles !
We should be looking to buy 5000 MT per month to start with.
The manufacturing time is about 30 days.
Tilter PDF Brochure: http://share.pacomlan.com/images/X6v48273.pdf